Furnace repair salt lake city
When it concerns Top, UT heating for a home, a heat pump is a wonderful device. This comfort system serves both as a forced-air heater and a/c unit. When used properly, a heatpump can assist a home save around 30% off the costs of using a heater throughout the winter.
Furnace repair salt lake city
A heatpump ends up being a much less great device when it doesn't work right, naturally. Even the best constructed and preserved heatpump can develop faults. The worst is when a heat pump will not turn on at all. This hardly ever takes place without some caution, however. It's more common for a heatpump to establish a small operating issue, such as stopping working to change from cooling mode to heating mode and vice versa.
Furnace Service Salt lake city
That brings us to the title of this post: What do you do when your heat pump won't do the "heat" part of its name?
Is the air from the vents cold ... or only lukewarm?
If there's some warmth from the air blowing into the rooms, however it's lukewarm or room temperature level, it often suggests the heatpump can become heating mode, but it's losing basic effectiveness. We recommend looking at the air filter prior to doing anything else. A clogged air filter that hasn't been altered in a few months will block air flow into the unit. The less air that enters the heat pump, the less air there is to heat! Change the filter and see if this makes a distinction. (And change it ever 1-- 3 months after that.).
Another possibility for low heating power is grime along the refrigerant coil. A layer of dirt makes it harder for the coil to launch heat into the air through condensation. The difficulty might also be with the outside system. Inspect to see if there's snow stacked against the cabinet or any other obstruction stopping the internal elements from drawing heat from the outside air.
If the air is cool as if the A/C was running ...
This suggests the heat pump isn't altering over to heating mode; it's stuck working like an air conditioning unit. There are different possible factors for this. The most common is a broken reversing valve. This valve is a necessary part for heat pump operation, considering that it changes the direction refrigerant flows through the system. If the circulation goes one instructions, the heat pump draws heat from the home and cools it. If it goes the other, the heatpump moves heat into the home and warms it. A damaged valve locks the heatpump in a single mode until the valve is replaced.
Another common cause for a stuck heat pump is a malfunction in the thermostat, which might check out inaccurate temperatures and decline to alter the heatpump into heating mode. The thermostat might have a wiring fault that has actually sufficed off from contact with the reversing valve.
The majority of these heat pump breakdowns require a professional to repair. Do not tinker with the HVAC yourself! Leave the expert work to skilled technicians, and you can count on the having your convenience restored in short order.
Post a Comment