As a resident you need to understand what is associated with a cooling tuneup. If you check out any house maintenance articles this spring, a lot of will encourage an A/C tuneup; some will even declare 25% cost savings. Forecasting cost savings without knowing what kind of tuneup gotten is a little silly. Motivating a tune up without explaining the difference in between an average tuneup and a high quality Air Conditioning tune up Salt lake Cityis an embarassment and costly.
Most tuneups declare to change, examine, reset, or modify back to factory settings. What does that imply? It suggests that when the service tech is done your system will be good as new. What it actually implies is that the advertisement is not extremely particular; tough to figure if you got your moneys worth.
Air conditioner repair salt lake city ut
First a little insight, the tuneup is the fundamental advertising model for many HEATING AND COOLINGS companies. The concept being they sell you a $59 tuneup hoping you're so satisfied with the work that it will result in a brand-new furnace install when the time comes. Any HVAC contractor in Salt lake City will happily service a customer for several years just for a possibility at landing the brand-new devices task. If that logic is extended the more tuneups the more future tasks so why not drop the tuneup cost? Just one problem as price drops, pressure to do more tuneups per tech increases and the quality of the tuneup suffers.
What should a quality tuneup include?
1. Measure air flow of system, definitely vital for capability and effectiveness. Most a/c unit require 400 cfm of air to operate at capability. There are three ways to determine air flow
A. Fixed pressure measurement. This is the most accurate method providing the blower wheel is cleaned.
B. A duct traverse. This includes drilling a series of holes in your return drop to measure air circulation with a wand style meter.
C. Tru-flow air meter. A measuring device installed in the filter slot. Some techs think its precision drops with bad duct style.
D. Temperature level drop throughout the system is not a precise measurement of air flow, while temp drop is very important in identifying
it will not properly determine air flow
2. Clean the condenser. The out door system need to be sprayed with a heavy foaming cleanser that soaks for ten to fifteen minutes prior to rinsing.
3. Measure indoor and outside conditions. Indoor wet bulb, indoor dry bulb and out door dry bulb need to all be determined. A certified tech will have the tools for this. After all measurements are taken the tech should outline them on a sliding chart that will figure out required very heat. Super Heat is a HEATING AND COOLING measurement that sets proper refrigerant charge.
4. Adjust refrigerant charge, as important as air flow. After airflow is set, the condenser is cleaned up and incredibly heat is figured out, the tech can link his determines and set the refrigerant charge.
5. Other helpful measurements.
A. Temperature level drop across coil need to be 18-22 degrees, this is universal.
B. Temperature drop across outside unit. The tech will understand this depending upon system.
C. Amp draw of compressor: b this will depend upon size of system.
For any company to do this work correctly it will cost more than $59. Tell the dispatcher what work you desire done and understand that it will cost more. If it costs two times as much as a scrap tuneup it deserves it for your convenience and wallet. Some companies will only pull and clean blower wheels on a Time and Products basis and thats all right. Now you can talk to your tech with out fretting about being bluffed into a bad task.
Post a Comment