Hard water is one of the most
common water problems in the United States. The problem affects more than 85%
of the water supply throughout America. So, when you get hard water at your
home, you know it comes with added problems. You are expected to clean more,
the water-consuming appliances life expectancy reduces, and the plumbing may
suffer.
Is Hard Water
Safe To Use?
Using hard water is generally safe
to use and drink; however, it comes with some household cleaning problems that
are hard to overlook. Therefore, it is better if you get water softener
installation at your Utah home, to avoid the problems often associated with
hard water.
Here are four ways hard water
increases your workload and makes it difficult to keep the house clean.
- Iron Stains
Hard water is loaded with a number
of minerals apart from a high concentration of calcium and magnesium. Depending
on the region you live in, the groundwater may also contain a high amount of
iron. Homeowners who use well water are more likely to have a high
concentration of iron in their water.
Iron-rich water can leave
unpleasant reddish-brown rust stains in and around the shower, sink, or the
toilet bowl. Thus, in certain parts of the country, iron stains can be a cause
of serious housecleaning headache. Getting rid of the stains can become
difficult if you receive iron-rich water supply. Even if you clean the stains,
they will keep coming back until you choose to address the hard water problem.
- Soap Scums
When you live in a region where
hard water is a problem, it becomes a daily struggle to keep the fixtures, and
tiles clean. Hard water reacts with the soap to form scums which are left
behind on the shower curtains, faucets, tiles, and other hard to reach places.
Thus, your dream of owning a spotless bathroom remains a far-fetched dream
only.
Soap combines with calcium and
magnesium particles in hard water and converts into the soap scum you see on
shower curtains, shower doors, tiles, fixtures, and bathtubs. It creates a
layer of scaliness over the surface which is hard to clean. If left for too
long, the soap scums continue to build up and can combine with mold and get as
hard as concrete.
- Increase Detergent Usage
Have you noticed an increase in
the amount of detergent or cleaning products lately? Do you think the
recommended amount of detergent is never enough to clean the clothes, dishes,
or home? Many people use a higher amount of detergents and soaps when using
hard water to clean a surface or clothes. However, over the years, it can add
up to a lot of additional expense.
According to some tests performed
by professionals, it was found that soft water only needs half as much
detergent as required by hard water. The same study also proved that dishwasher
required 30% less detergent when hard water was switched with soft water. Thus,
when your house receives soft water, you can save a considerable amount on
cleaning supplies.
- Spotty Dishes
Do you often find yourself
cleaning the dishes after they are rinsed in the dishwasher? Do you always find
spots on clean dishes? Hard water may be the culprit here. If dishes come out
of the dishwasher and still look dirty, it may be because of mineral deposit on
the dishes. You can never impress your guests with filthy looking glassware or
spotty dishes, can you?
Even if you rinse your glassware
after taking them out from the dishwasher, they will remain spotted because the
problem is with the hard water, not the dishwasher. Also, exposing the
glassware and dishes to hard water for a long period of time can leave them
permanently cloudy. Therefore, make sure to find a solution at the earliest.
Why You Need
Soft Water?
Hard water form soap scums instead
of frothy lather which is required to effectively clean the clothes, dishes, or
home in general. Soap scums can leave a whitish layer across the bathtub,
clothes, glassware, and showers. Moreover, bathing in hard water can leave the
skin dry, itchy, and prone to acne.
So if you want to avoid spending
hours at stretch cleaning the dishes or scrubbing the soap scrum away, make
sure to get water softener installation at your Utah home. An effective water
softener installation by a water expert will save you money in the long run.
Finding a
Solution Through Water Treatment Experts
Now that you understand the
nuisance of hard water, it’s time to decide whether you want to live with the
problem or find a solution for it. A whole house water softener installation in
Utah will help you correct the negative effects of hard water.
Want more information on waterfiltration installation in Salt Lake City? Get in touch with the experts. Call
Lee’s Heating and Air water experts at 801-467-1561 or visit us at https://www.leesheatac.com to know
more about our services.
Post a Comment